mirror of
https://github.com/ChronosX88/netsukuku.git
synced 2024-12-23 01:11:47 +00:00
122 lines
4.6 KiB
Plaintext
122 lines
4.6 KiB
Plaintext
== NTK_RFC 0002 ==
|
|
|
|
Subject: bandwidth measurement
|
|
|
|
----
|
|
This text describes a change to the Npv7.
|
|
It will be included in the final documentation, so feel free to correct it.
|
|
But if you want to change the system here described, please contact us first.
|
|
----
|
|
|
|
== Link measurement issues ==
|
|
|
|
In the current version of the Npv7 the link quality is measured only with the
|
|
rtt and packets loss, so only the lantecy is actually considered, this isn't
|
|
optimal since also a link with a bandwidth of 20000 bps can have a good
|
|
lantecy.
|
|
It isn't a critical problem since more than one route is used to reach a
|
|
single dst_node, so when a route is satured the kernel will use another one
|
|
looking in the nexthop table of that route.
|
|
|
|
== Improvement ==
|
|
|
|
In order to improve the link measurement a node must include in the tracer
|
|
pkts the available bandwidth of its traversed link.
|
|
The link bandwidth, which will be used to modify the real rtt, in this way it
|
|
will be possible to have a traffic shaping based also on the real bandwidth of
|
|
the links.
|
|
|
|
== Bandwidth measurement ==
|
|
|
|
There are two phases of measurement: in the first the total bandwidth of the
|
|
new links is measured by the hooking node and the destination nodes, in the
|
|
second the bandwidth of the links is constantly monitored.
|
|
|
|
The utilised bandwidth will be monitored with iptables and the libiptc library.
|
|
See http://www.tldp.org/HOWTO/Querying-libiptc-HOWTO/bmeter.html .
|
|
|
|
We also need to know the total bandwidth which can handle the network
|
|
interface. What is a good method to do this?
|
|
|
|
=== Total available bandwidth ===
|
|
|
|
{{{
|
|
A <-> B <-> C
|
|
}}}
|
|
|
|
The node B is hooking to A and C. At the end of the hook, B measures the
|
|
total available bandwidth of the links B<->C and B<->A.
|
|
It sends an indefinite amount of random packets, for some seconds, to the
|
|
destination of the link. The link is monitored with libiptc and the maximum
|
|
rate of bytes per second is registered as the maximum available upload
|
|
bandwidth for that specific link. These steps are repeated for each rnode.
|
|
Since the link might be asymettric the measurement is also repeated by A and
|
|
C. In the end we have the measurement of: A->B, B->A, C->B, B->C.
|
|
|
|
=== Realtime bandwidth monitoring ===
|
|
|
|
With the use of the libiptc library, B can monitor the bandwidth usage of its
|
|
links.
|
|
|
|
{{{
|
|
Max_link_bw = Total available bandwidth of the link
|
|
free_link_bw = available/not used bandwidth of the link
|
|
cur_used_link_bw= amount of bandwidth currently used
|
|
|
|
Max_NIC_bw = maximum bandwidth of the network interface
|
|
cur_used_NIC_bw = amount of the total bandwidth currently used of the network
|
|
interface
|
|
}}}
|
|
|
|
To calculate the `free_link_bw':
|
|
{{{
|
|
free_link_bw = Max_link_bw - cur_used_link_bw
|
|
if(free_link_bw > Max_NIC_bw - cur_used_NIC_bw)
|
|
free_link_bw = (Max_NIC_bw - cur_used_NIC_bw);
|
|
}}}
|
|
The `free_link_bw' value will be used to modify the `rtt' used to sort the
|
|
routes in the routing table.
|
|
{{{
|
|
modified_rtt(free_link_bw, real_rtt) = 27<<27 + real_rtt - bandwidth_in_8bit(free_link_bw)
|
|
|
|
real_rtt must be <= 2^32-27<<27-1 (about 8 days)
|
|
|
|
You can find the definition of bandwidth_in_8bit() here:
|
|
http://hinezumilabs.org/cgi-bin/viewcvs.cgi/netsukuku/src/igs.c?rev=HEAD&content-type=text/vnd.viewcvs-markup
|
|
}}}
|
|
|
|
== Latency VS bandwidth ==
|
|
|
|
It may also happens that a link has a good bandwidth but a high latency.
|
|
A low latency is needed by semi-realtime applications: for a ssh connection
|
|
we don't care to have a 100Mbs connection but we want to use the shell in
|
|
realtime, so when we type a command we get a fast response.
|
|
|
|
The Netsukuku should create three different routing tables:
|
|
* the first shall include the routes formed by the links with the best bandwidth value.
|
|
* the second shall include the "best latency" routes
|
|
* the routes in the third table shall be an average of the first and the second tables
|
|
|
|
If the protocol of the application uses the "tos" value in its IP packets, it
|
|
is possible to add a routing rule and choose the right table for that
|
|
protocol: the ssh protocol will be routed by the second table.
|
|
|
|
== Caveats ==
|
|
|
|
If the libiptc are used, it will be more difficult to port the daemon for
|
|
other kernels than Linux. Libpcap is a good alternative.
|
|
It is possible to capture the packets for some seconds using libpcap, count
|
|
them and find how much bandwidth is used.
|
|
|
|
== IGS ==
|
|
|
|
The inet-gw which share their internet connection measure also the utilzed
|
|
bandwidth of the Internet connection.
|
|
The maximum download and upload bandwidth is known since it must be specified
|
|
by the user in the netsukuku.conf config file. In this way, monitoring the
|
|
device used by the Internet default route, it's trivial to known the
|
|
available bandwidth.
|
|
|
|
----
|
|
related: [Netsukuku_RFC]
|