psyced/INSTALL.txt
2009-02-08 00:30:32 +01:00

262 lines
11 KiB
Plaintext

Installing the psyced
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We're very proud to see you are about to install a psyced!
(Windows System)
You received this in form of an executable. By executing it you
will be prompted some questions, then sent to a web-based
configuration interface. So essentially you don't need any help here.
Please move directly on to the FIRSTSTEPS document once you have
done the installation.
[1]http://www.psyced.org/FIRSTSTEPS
(Gentoo Linux System)
Download the ebuilds which are available from [2]http://www.psyced.org
and follow the instructions inside. Once psyced is emerged you can go
directly to chapter 3.
(Linux or Unix System)
In a nutshell, all you have to do is execute './install.sh' and go from
there. It will tell you to download an LPC driver from
[3]http://lpc.psyc.eu
then compile and configure it with you interactively. So you don't need
to know anything more now, but if you want more information, read on.
(Questions and Answers)
Don't be afraid to come into our developer chatroom and interact with
us as you go along. We have designed the installation to be totally
simple and beginner friendly. If you're not experiencing it as such,
something has gone wrong. Don't try to figure it out alone, talk to us.
And.. please be patient with our slow response times.
psyc://psyced.org/@welcome
[4]irc://psyced.org/#welcome
[5]http://psyced.org/PSYC/
[6]telnet psyced.org
0. System Requirements
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You can probably skip this if you think you have a sanely configured
GNU/POSIX system.
The following requirements exist for building psyced and psyclpc:
o Disk Space:
Make sure you have approximately 7 MB of temporary free disk space
available. After installation psyced occupies approximately 3 MB of
disk space (the actual required disk space depends on the amount of
users, logs etc).
o ANSI-C Compiler:
Make sure you have an ANSI-C compiler installed. The GNU C compiler
(GCC) from the Free Software Foundation (FSF) is recommended.
You can find the homepage of GNU at [7]http://www.gnu.org/. GCC
binaries for Solaris can be loaded from [8]http://www.sunfreeware.com/.
o POSIX YACC compliant grammar compiler
You probably have either bison or yacc installed, otherwise do the
appropriate emerge or whatever software installation.
o Useful C libraries
OpenSSL, pcre, zlib, idn > 0.5.5, nsl, mlib.
o Some standard or popular Unix applications
bzip2, make, egrep, touch, uname, sh, sed, fileutils etc.
o PERL 5 Interpreter
The distribution includes some perl scripts that may or may not
be useful. 'psyconf' in particular is needed to get the configuration
in place, it is however not needed at runtime.
1. How to compile an LPC driver manually
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You can skip this part if you want to let the installation mechanism
do it for you. To be honest, the danger of us not giving you enough
information for you to get it done right is lessened if you let the
process do it.
[9]http://lpc.psyc.eu will direct you to the current download areas for
the PSYC-enabled LPC driver, psyclpc. It uses
a standard auto-configuration system which on most platforms does all the
work for you (see below for exceptions). That's how install.sh can do it
just like that.
To prepare the compilation, enter the src directory of the LPC driver and
execute './configure' (which will run the 'settings/psyced' script).
The default target directory is '/opt/psyced' or a subdirectory of your
home directory if you are installing in user mode. Please edit the
'settings/psyced' script if you need a different path. You may want to
tweak some compilation configuration settings contained in that file,
but there isn't a need to.
After configuration is finished, you may want to modify the Makefile
to fine tune those parameters which are not covered by the configuration.
(like maybe change 'INSTALL=./install.sh -c' to 'INSTALL=./install.sh')
But there is generally no need to do anything.
The compilation is done using make. Following targets are implemented:
<none>: compile the driver
install: compile the driver and install it in ${bindir}
utils: compile the utilities, especially the ERQ daemon
install-utils: compile and install the utilities in ${bindir}
You will need an 'psyclpc' and an 'erq' binary for psyced to work.
For more details feel free to read the driver's INSTALL file.
2. Okay, let's install it!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To install psyced, execute the './install.sh' script from within
the distribution directory. On some systems you may have to use a
different shell, like 'ksh install.sh' or 'bash install.sh'.
You will be asked some configuration questions. When done, it will
create several files for you and transfer the content of the psyced
distribution to the target directory you specified interactively.
Depending on your userid (root or other) you will be given
/opt/psyced or ~/psyced as defaults for installation. We
continue this documentation assuming you picked the root defaults.
Start psyced:
/opt/psyced/bin/psyced
Test it:
telnet localhost 2323
or
irc <nick> localhost
3. Configuring psyced
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Either install.sh has generated a psyced.ini for you, or your
software management tools have produced one for you. It usually
resides in /etc/psyc, but you may have chosen to put it elsewhere.
Have a look into that file to ensure it has all the settings you
want. There are some further configuration options in there that
install.sh hasn't asked you about.
Every time you change that file you need to feed it to the
psyconf command which will generate several control files for
your psyced installation. Editing those files by hand is not
recommended as a new call to 'psyconf' will simply delete any
manual changes.
We also have a very neat web-based configuration tool. Unfortunately
it hasn't been updated to work with the new configuration strategy.
Still, 'psyconf' is enough for most things.
4. Troubleshooting
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Should you attempt to run psyced as root, you may later experience problems
running it under the uid you actually were planning to use, because files
have been generated that belong to root. 'chown -R ' repairs that.
* Should erq refuse to compile, your system might be providing a less recent
resolver library. Add '-lresolv' manually to LIBS in the Makefile and
re-issue 'make' (theroue had this effect on Slackware).
* We recently had a bug in the install.sh by which the line in the 'mypsyced'
file which is in charge of calling ./configure was broken in two and thus
only one half of the flags were used. Should you find #undef TLS in your
config.h it is quite likely that 'mypsyced' is literally broken in two.
* The LPC driver will have TLS in, even if you told install.sh not to use it.
This allows you to change your mind later on and shouldn't be a problem,
but if it is, edit src/config.h to #undef USE_TLS and redo the compilation.
* Recent variants of psyclpc and LDMUD complain when you compile TLS in, then
don't have a certificate to go with it. You can safely ignore it. This and
related messages are harmless and need no treatment:
'SSL error:02001002:system library:fopen:No such file or directory.'
* There are however recent problems with gnutls. psyclpc and LDMUD are being
used with openssl in most cases, so the gnutls interface may not be up to
date. If you encounter problems, try installing openssl.
* Should it look for the lpc driver in /usr/sbin although you have it
elsewhere, then psyconf got the architecture guessing wrong. Come
into the chat and show us the first lines of psyconf output, so
we can fix that.
* Sometimes installation problems can be fixed by running a cvs update
on install.sh and bin/psyconf, if they are new and just recently corrected.
If your install.sh doesn't appear updateable, look into the installation
directory - there is another copy. Run 'cvs update install.sh' then copy
it back to where you need it.
* Should you see the message "Failed to load master object 'secure/master'!"
when starting the driver, then you compiled it without the psyced.settings
which the installation process should have used automatically. You can
find them in the config directory.
* "tls_init_connection(): TLS layer hasn't been initialized." usually
happens when you are connecting a TLS port with no TLS on the client
side. But it can also mean that psyclpc didn't successfully read its
key and certificate from the start. Are the permissions correct?
What is psyclpc telling you right after starting up? Is it able to
read your key and certificate file?
* If you make any costum modifications to the psyced source code, you may
run into CVS collisions when running the psyced -u command to
fetch updates. Pay attention to its output, and inspect any file that
was marked with a 'C' (as in collision) manually for repairs.
If you already updated it, you can look for collisions in the output of
psyced -d, the command to see differences between the repository
and your local copy of the software.
* If you still encounter problems, please read (Questions and Answers)
at the beginning of this document. And, as always, come to the developer
chatroom!
5. Success!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You can now move on to the FIRSTSTEPS document.
Here's the online version, but you have one on your harddisk too.
[10]http://www.psyced.org/FIRSTSTEPS
This document was written by [11]psyc://psyced.org/~lynX
and Marek Schneider ([12]psyc://ve.symlynX.com/~real).
--
http://www.psyced.org/INSTALL.html
last change by lynx on lectern at 2009-01-27 23:32:29 CET
References
1. http://www.psyced.org/FIRSTSTEPS
2. http://www.psyced.org/
3. http://lpc.psyc.eu/
4. irc://psyced.org/#welcome
5. http://psyced.org/PSYC/
6. telnet://psyced.org/
7. http://www.gnu.org/
8. http://www.sunfreeware.com/
9. http://lpc.psyc.eu/
10. http://www.psyced.org/FIRSTSTEPS
11. irc://psyced.org/lynX,isNick
12. irc://ve.symlynX.com/real,isNick